Many of the Commission’s toll and toll-supported (non-toll) bridges have restrictions on vehicular speed, vehicular size and vehicular weights. Some of these bridges are narrow, century-old truss types that carry local or county roads.  The table below lists the width, vertical clearance, weight and speed limitations of applicable Commission bridges.

Commission Bridge Properties

Bridge Road Deck Width Vertical Clearance Weight Restriction Speed Limit
Milford-Montague (Route 206) Toll Bridge 27′ – 6″ 16′ – 2″* No Loads Over 80,000 Pounds 25 MPH – NB
40 MPH – SB
Portland-Columbia Toll Bridge 29 – 0″ 15′ – 2″* No Loads Over 80,000 Pounds 35 MPH
Riverton-Belvidere Toll-Supported Bridge 16’ – 4” 15′ – 4″ 8 Tons 15 MPH
Northampton Street Toll-Supported Bridge (three lanes) 32’ – 0” 10’ – 6” 3 Tons 15 MPH
Riegelsville Toll-Supported Bridge 15’ – 11” 13’ – 4” 3 Tons 15 MPH
Upper Black Eddy-Milford Toll-Supported Bridge 20’ – 0” 14′ – 11″ No Loads Over 80,000 Pounds 15 MPH
Uhlerstown-Frenchtown Toll-Supported Bridge 16’ – 6” 12’ – 6”** 15 Tons 15 MPH
Centre Bridge-Stockton Toll-Supported Bridge 20’ – 0” 12’ – 0”** 5 Tons 25 MPH
New Hope-Lambertville (Route 202) Toll Bridge 28′ – 9″ 15′ – 6″* No Loads Over 80,000 Pounds 55 MPH – NB
20 MPH – SB
New Hope-Lambertville Toll-Supported Bridge 20’ – 7” 14′ – 11″ 4 Tons 15 MPH
Washington Crossing Toll-Supported Bridge 15’ – 0” 8’ – 0”** 3 Tons 15 MPH
Calhoun Street Toll-Supported Bridge 18’ – 6” 8’ – 0”** 3 Tons 15 MPH
Lower Trenton Toll-Supported Bridge 19’ – 5” 10′ – 0″** 5 Tons 25 MPH

Note: Any vehicle exceeding one or more of the following criteria and/or needing a permit to operate on the state routes of either Pennsylvania or New Jersey requires a permit and should go to the Truck Permit Application section under the Travel Info header of this website for additional information.

  • Gross vehicle weight (GVW) over 80,000 pounds
  • Over 13 feet 6 inches in height
  • Greater than 8 feet 6 inches in width
  • More than 75 feet in length

* Toll plaza vertical clearances
** Posted vertical clearances